SmartTapinc.com

I was wondering if anyone has used this system and maybe we could get them to come to our fall conference to demonstrate how this system works. 

That company has been inviting to our meetings, many times in the past, but has choose not to attend.

I'm guessing they have some means to accomplish below. I'd love to see the process. 

5.1.10.11.12 Breaching or Penetrating Medical Gas Piping.

5.1.10.11.12.1 Positive pressure patient medical gas piping

and medical support gas piping shall not be breached or penetrated

by any means or process that will result in residual

copper particles or other debris remaining in the piping or

affect the oxygen-clean interior of the piping.

5.1.10.11.12.2 The breaching or penetrating process shall

ensure that any debris created by the process remains

contained within the work area.

Rocky, good points.

I would add.

5.1.10.4.2.1 Tube ends shall be cut square using a sharp

tubing cutter to avoid deforming the tube.

5.1.10.4.2.2 The cutting wheels on tubing cutters shall be free

from grease, oil, or other lubricant not suitable for oxygen service.

5.1.10.4.2.3 The cut ends of the tube shall be permitted to be

rolled smooth or deburred with a sharp, clean deburring tool,

taking care to prevent chips from entering the tube.

Steve, When you verify SmartTap, do you note that the tubing was not cut according to the code?